Alloy PoE PSE Fast Ethernet Media Converter POE200SC
The Alloy POE200SC Fast Ethernet PoE Media Converter is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.
The Alloy POE200SC Fast Ethernet PoE Media Converter is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion. The POE200SC Fast Ethernet PoE Media Converter is a dual purpose device. It supports media conversion applications between Fast Ethernet 10/100Base-TX over UTP/STP copper cable and SC terminated 100Base-FX over multimode fibre cable, supporting ranges of up to 2 kilometres.
CONDITION
Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.
WARRANTY
This item comes with 36 month manufacturer's warranty.
FEATURES
• Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
• IEEE 802.3af PoE (Power over Ethernet) PSE compliant
• Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
• Supports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion
• 10/100Mbps auto-negotiation on RJ-45 copper port
• Maximum fibre link ranges: 40kms
• LC, SC and ST fibre port connector models
• Far-End-Fault and Forced mode LFP supports easy link fault monitoring and auto link shutdown
QUICK SPECIFICATIONS
RJ-45 Port
• 10/100Mbps throughput
• NWay auto-negotiation
• Auto-MDI
• Full/Half-Duplex transmission
• IEEE 802.3af compliant PoE
Fibre Optic Ports
• 100Mbps throughput
• Auto-negotiation
• Transmission: Full-duplex or Half-duplex
Cable Types Supported
• RJ-45 Port: UTP or STP Cat.3 or higher (must be Cat.5 or higher for Fast Ethernet networks)
• LC/SC/ST Ports (multimode models): 50/125µm, 62.5/125µm or 100/140µm
• SC Ports (singlemode/WDM models): 8.3/125µm, 8.7/125µm, 9/125µm or 10/125µm
Power over Ethernet Specifications
• IEEE 802.3af Power over Ethernet compliant
• PSE (Power Sourcing Equipment) functionality
• PD Class 0 (0.44 to 13 watt supply)
• PD Class 1 (0.44 to 3.8 watt supply)
• PD Class 2 (3.8 to 6.5 watt supply)
• PD Class 3 (6.5 to 13 watt supply)
• Signature sensing
• Power monitoring functions including PD (Powered Device) discovery, classification, current limiting etc
• PD Power-out auto-detection
• PD Over-current and Under-current power protection functions
• Fault Protection Input
• Minimum load sensing
• PSE MDI power enable/disable
Power Feeding Support
• Via TP Pins 1, 2, 3 and 6
LFP (Link Fault Passthrough) Functions
• LED status propagation
• Far End Fault mode supported: link pulse to link partner terminated on loss of the fibre RX signal
DIP Switch Configuration
• DIP 1: TP Auto-negotiation enabled/disabled
• DIP 2: Force TP 10Mbps/100Mbps
• DIP 3: Force TP duplex mode Half/Full
• DIP 4: LFP Enabled/LFP disabled
• DIP 5: Force Fibre duplex mode Half/Full
• DIP 6: PoE Enabled/PoE disabled
LED Indicators
• PWR: Green, lit when +5V power source active
• TP LNK/ACT: Lit - TP link good; Blinks - TP traffic is present
• P SPEED: Green Lit - TP speed 100Mbps; Off - speed 10Mbps
• PoE PSE-TP: Green Lit - PoE power supply active; Red Lit - PoE power supply disrupted
• 4W: Green Lit - supplying PD Class 1 power
• 7W: Green Lit - supplying PD Class 2 power
• 15.4W: Green Lit - supplying PD Class 0 or 3 power
Power
• 100–240VAC, 47–63Hz/DC 48V (16-60V) internal power supply
• Maximum consumption: AC 24W/DC 15W
Electromagnetic Compatibility
• FCC Part 15 Class A, CE Mark, C-Tick
Mechanical
• Form Factor: Standalone Desktop/Wallmount all-metal case
• Dimensions: 133mm x 158mm x 40mm (D x W x H)
• Weight: 750 grams
• Environmental Specifications
• Temperature: 0° to 50°C (Standard Operating)
• Humidity: 5% to 90% (Standard operating)
WHAT'S INCLUDED
• 1 x Alloy PoE PSE Fast Ethernet Media Converter 100Base-TX to 100Base-FX (SC), LFP, 2Km (MPN# POE200SC)
• User Guide
Do you have a question about this product? Please call 1800 90 90 99.
The Alloy POE200SC Fast Ethernet PoE Media Converter is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.
16 other products in the same category:
Comments (0)
The Alloy POE200SC Fast Ethernet PoE Media Converter is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.