Cisco Meraki MS390 48-Port 5GbE L3 UPOE Switch MS390-48UX2-HW

The Cisco Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks. The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides an Adaptive Policy using an over-the-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simple powerful solution to the most demanding wired access applications.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a limited - lifetime manufacturer's warranty.

• Auto-negotiation
• IGMP snooping
• Syslog support
• port mirroring
• E-mail alert
• Broadcast Storm Control
• Per-VLAN Spanning Tree (PVST)
• DHCP snooping
• Access Control List (ACL) support
• Quality of Service (QoS)
• DHCP server
• Uni-Directional Link Detection (UDLD)
• DHCP relay
• Port Security
• hot swappable fan
• Cisco StackPower technology
• crossover detection
• cloud managed
• 3 fans, Role-Based Access Control (RBAC)
• Root Guard
• Loop Guard
• MAC Access Bypass (MAB)
• BPDU Guard
• Cisco Discovery Protocol (CDP)

• Device Type: Switch - 48 ports - L3 - managed - stackable
• Enclosure Type: Rack-mountable 1U
• Subtype: 5 Gigabit Ethernet
• Ports: 48 x 100/1000/2.5G/5GBase-T (UPOE)
• Power Over Ethernet (PoE): UPOE
• PoE Budget: 645 W
• Performance: Switching capacity: 640 Gbps | Stacking bandwidth: 480 Gbps | Forwarding rate: 476.19 Mpps
• MAC Address Table Size: 32K entries
• Jumbo Frame Support: 9600 bytes
• Max Units In A Stack: 8
• Routing Protocol: OSPF, VRRP, OSPFv2, static IP routing, RSTP, STP
• Remote Management Protocol: DHCP, IPv4, IPv6, RSTP, RADIUS
• Authentication Method: RADIUS
• Compliant Standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
• Interfaces: 48 x 100/1000/2.5G/5G RJ-45 UPOE | 2 x network stack device QSFP uplink | 1 x management
• Expansion Slots: 1 (total) / 1 (free) x expansion slot

• Cisco Meraki MS390 48-Port 5GbE L3 UPOE Switch MS390-48UX2-HW
• 1 x Power Supply (MA-PWR-1100WAC)
• Rack mount brackets and screw kit
• 3 x Pre-Installed Fans, Cable guide

Do you have a question about this product? Please call 1800 90 90 99.

Visit here for more Cisco networking devices such as Switches and Routers.