StarTech Dual-Slot M.2 Drive to SATA Adapter for 2.5" Drive Bay S322M225R - RAID
The StarTech S322M225R is a two-drive M.2 to SATA adapter that lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay and increase your storage options by configuring a powerful RAID array.
The StarTech S322M225R is a two-drive M.2 to SATA adapter that lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay, and increase your storage options by configuring a powerful RAID array.
The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another.
The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps.
The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn’t require any extra software or drivers, to get you up and running quickly.
CONDITION
Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.
WARRANTY
This item comes with a 24-month manufacturer's warranty.
FEATURES
• Install two M.2 SSD drives into a single 2.5” drive bay
• Multiple RAID modes supported: RAID 0, 1, spanning, or JBOD
• Open-frame steel mounting bracket with 2.5” SATA form factor housing
• Supports 7 mm or larger 2.5" SATA bays
• Supports B key M.2 SATA SSDs - full-length M.2 drives (2230, 2242, 2260, 2280)
• Supports SATA I, II and III (up to 6Gbps)
• TRIM support to enhance the stability and performance of your M.2 NGFF SSDs
• Easy to install with all necessary hardware included
• SMART support
• Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
QUICK SPECIFICATIONS
• Product Description: StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R) - storage controller (RAID) - M.2 Card - SATA 6Gb/s
• Device Type: Storage controller (RAID) - internal
• Bus Type: SATA 6Gb/s
• Colour: Red
• Compatible Bay: 1 2.5"
• Hard Drive Form Factor Compatibility: M.2
• Interface: M.2 Card
• Data Transfer Rate: 6 GBps
• Supported Devices: Disk array (RAID), solid state drive
• Max Storage Devices Qty: 2
• RAID Level: RAID 0, RAID 1, JBOD, BIG
• Dimensions (WxDxH): 7 cm x 10 cm x 0.7 cm
• Weight: 41 g
WHAT'S INCLUDED
• 1x Dual M.2 to SATA host adapter
• 2x Sets of drive-mounting hardware
• 4x Adapter-mounting screws
• Quick-start guide
Do you have a question about this product? Please call 1800 90 90 99.
The StarTech S322M225R is a two-drive M.2 to SATA adapter that lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay and increase your storage options by configuring a powerful RAID array.
16 other products in the same category:
-
![]()
- Out-of-Stock
Comments (0)
The StarTech S322M225R is a two-drive M.2 to SATA adapter that lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay and increase your storage options by configuring a powerful RAID array.