Yealink AV Bridge Pro Audio Dante A/V Extender for Meeting Rooms
The Yealink AV Bridge is a compact pro audio solution designed to extend and optimise audio and video connectivity in modern meeting spaces. CM50 and CM20 ready, it supports flexible microphone and speaker configurations, making it ideal for medium to large rooms and cost-effective pro audio deployments.
The Yealink AV Bridge is a compact pro audio solution designed to extend and optimise audio and video connectivity in modern meeting spaces. CM50 and CM20 ready, it supports flexible microphone and speaker configurations, making it ideal for medium to large rooms and cost-effective pro audio deployments. With built-in A/V extension, the AV Bridge allows cameras and audio devices to be placed away from the host system, enabling cleaner room layouts and BYOM applications. Featuring low-latency Dante audio, essential tuning tools, and simple plug-and-play setup via Yealink Room Designer, it delivers reliable performance with minimal configuration effort.
CONDITION
Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.
WARRANTY
This item comes with a 12-month manufacturer's warranty.
FEATURES
- CM50/CM20-Ready: Supports 1× CM50 or up to 4× CM20 with Yealink speakers and third-party Dante or analog speakers, ideal for medium to large rooms and cost-sensitive pro audio scenarios.
- Extension for A/V: Functions as an A/V extender to bridge camera or audio signals to the host for flexible device placement, making it suitable for audio and video extension and BYOM (Bring Your Own Meeting) applications.
- Compact Pro Audio: Mini audio box featuring 4×4 Dante (Tx/Rx) for low-latency, routable audio across your Dante network.
- Essential Tuning Built-In: Includes a matrix mixer for custom routing and PEQ for foundational room tuning, adapting easily to multi-device audio environments.
- Effortless Setup: One-touch deployment button and Yealink Room Designer support enable plug-and-play setup with simple and efficient configuration.
QUICK SPECIFICATIONS
- Dante Channels
- Input Channels: 4
- Output Channels: 4
- Frequency Response: 100–20kHz
- THD+N: ≤0.1%
- Sampling Rate: 48K
- Bit Depth: 24Bit
- Dynamic Range: 97dB
- Analog Channels
- Input Channel: 1 × 3-pin Phoenix connector (analog input)
- Output Channel: 1 × 5-pin Phoenix connector (analog output)
- Frequency Response: 100–20kHz
- THD+N: <1%
- Input Dynamic Range: 92dB
- Output Dynamic Range: 94dB
- Equivalent Input Noise: -88dBu
- Analog Input Gain Range: 0 to 11dB
- Analog Output Limiting Range: -10dBV to +4dBu
- USB Channels
- Sampling Rate: 48K / 16K
- Bit Depth: 16bit / 24bit
- Product Information
- Product Dimensions: 150 × 100 × 28 mm
- Product Weight: 315 g
- Material: PC + ABS
- Operating Temperature: 0–40℃
- Operating Humidity: 0–93% RH
- Power Supply: PoE (Power over Ethernet)
- Power Consumption (Full Load): 13W
- Power Consumption (No Load): 8W
- Logistics Information
- Package Dimensions: 191 × 125 × 88 mm
- Gross Weight: 616 g
- Net Weight: 315 g
- Networking
- Cable Requirements: Cat5e or higher (shielded cable recommended)
- Connector Type: RJ45
WHAT'S INCLUDED
- 1x Yealink AV Bridge Pro Audio Dante A/V Extender for Meeting Rooms
- 1× Quick Installation Guide
Do you have a question about this product? Please call 1800 90 90 99.
TTS-AV-Bridge
New
10000 Items
Specific References
- MPN
- AV Bridge
The Yealink AV Bridge is a compact pro audio solution designed to extend and optimise audio and video connectivity in modern meeting spaces. CM50 and CM20 ready, it supports flexible microphone and speaker configurations, making it ideal for medium to large rooms and cost-effective pro audio deployments.
You might also like
16 other products in the same category:
Comments (0)
The Yealink AV Bridge is a compact pro audio solution designed to extend and optimise audio and video connectivity in modern meeting spaces. CM50 and CM20 ready, it supports flexible microphone and speaker configurations, making it ideal for medium to large rooms and cost-effective pro audio deployments.