Alloy PoE PSE Fast Ethernet Media Converter POE200SC.20

The Alloy POE200SC.20 Fast Ethernet PoE Media Converter has a 10/100Mbps PoE RJ-45 port and a SC terminated singlemode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion. This device is capable of supporting media conversion applications between Fast Ethernet 10/100Base-TX over UTP/STP copper cable and SC terminated 100Base-FX over singlemode fibre cable, supporting ranges of up to 20 kilometres.

CONDITION

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

WARRANTY

This item comes with 36 month manufacturer's warranty.

FEATURES

• Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
• IEEE 802.3af PoE (Power over Ethernet) PSE compliant
• Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
• Supports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion
• 10/100Mbps auto-negotiation on RJ-45 copper port
• Maximum fibre link ranges: 40kms
• LC, SC and ST fibre port connector models
• Far-End-Fault and Forced mode LFP supports easy link fault monitoring and auto link shutdown

QUICK SPECIFICATIONS

RJ-45 Port
• 10/100Mbps throughput
• NWay auto-negotiation
• Auto-MDI
• Full/Half-Duplex transmission
• IEEE 802.3af compliant PoE
 

Fibre Optic Ports
• 100Mbps throughput
• Auto-negotiation
• Transmission: Full-duplex or Half-duplex

Cable Types Supported
• RJ-45 Port: UTP or STP Cat.3 or higher (must be Cat.5 or higher for Fast Ethernet networks)
• LC/SC/ST Ports (multimode models): 50/125µm, 62.5/125µm or 100/140µm
• SC Ports (singlemode/WDM models): 8.3/125µm, 8.7/125µm, 9/125µm or 10/125µm

Power over Ethernet Specifications
• EEE 802.3af Power over Ethernet compliant
• PSE (Power Sourcing Equipment) functionality
• PD Class 0 (0.44 to 13 watt supply)
• PD Class 1 (0.44 to 3.8 watt supply)
• PD Class 2 (3.8 to 6.5 watt supply)
• PD Class 3 (6.5 to 13 watt supply)
• Signature sensing
• Power monitoring functions including PD (Powered Device) discovery, classification, current limiting etc
• PD Power-out auto-detection
• PD Over-current and Under-current power protection functions
• Fault Protection Input
• Minimum load sensing
• PSE MDI power enable/disable

Power Feeding Support
• Via TP Pins 1, 2, 3 and 6

LFP (Link Fault Passthrough) Functions
•LED status propagation
•Far End Fault mode supported: link pulse to link partner terminated on loss of the fibre RX signal

DIP Switch Configuration
• DIP 1: TP Auto-negotiation enabled/disabled
• DIP 2: Force TP 10Mbps/100Mbps
• DIP 3: Force TP duplex mode Half/Full
• DIP 4: LFP Enabled/LFP disabled
• DIP 5: Force Fibre duplex mode Half/Full
• DIP 6: PoE Enabled/PoE disabled

LED Indicators
• PWR: Green, lit when +5V power source active
• FX LNK/ACT: Lit - fibre port link good; Blink - fibre traffic is present
• TP LNK/ACT: Lit - TP link good; Blinks - TP traffic is present
• TP SPEED: Green Lit - TP speed 100Mbps; Off - speed 10Mbps
• PoE PSE-TP: Green Lit - PoE power supply active; Red Lit - PoE power supply disrupted
• 4W: Green Lit - supplying PD Class 1 power
• 7W: Green Lit - supplying PD Class 2 power
• 15.4W: Green Lit - supplying PD Class 0 or 3 power

Power
• 100–240VAC, 47–63Hz/DC 48V (16-60V) internal power supply
• Maximum consumption: AC 24W/DC 15W
Electromagnetic Compatibility
• FCC Part 15 Class A, CE Mark, C-Tick

Mechanical
• Form Factor: Standalone Desktop/Wallmount all-metal case
• Dimensions: 133mm x 158mm x 40mm (D x W x H)
• Weight: 750 grams
• Environmental Specifications
• Temperature: 0° to 50°C (Standard Operating)
• Humidity: 5% to 90% (Standard operating)

WHAT'S INCLUDED

• 1 x Alloy PoE PSE Fast Ethernet Media Converter POE200SC.20
• User Guide

Do you have a question about this product? Please call 1800 90 90 99.