Cel-Fi Quatra Telstra Coverage Unit with 3/5/7/28 Bands RPR-CF-00153

The Cel-Fi Quatra Telstra Coverage Unit with 3/5/7/28 Bands RPR-CF-00153 operates in off-air mode and combines the best of active DAS and patented Cel-Fi technologies that have been widely adopted by network operators around the world. QUATRA is network safe, designed for maximum UE spectral efficiency while protecting network hygiene.

The Cel-Fi QUATRA Coverage Unit (CU) connects to a Network Unit (NU – sold separately) and is responsible for rebroadcasting Telstra mobile service. Each CU connects to the NU using an ordinary Cat-5e or Cat-6 Ethernet cable which supplies both the digital signal and DC power via PoE.

Note: Requires the QUATRA Network Unit to function.

You may also check all the Repeater devices, we have at The Telecomshop.

Brand New - A brand-new, unused, unopened, undamaged item in its original packaging.

This item comes with a 12-month manufacturer's warranty.

• CU’s provides coverage within the building (up to four per Network Unit)
• Self-configuring and self-optimizing
• Telstra 3G (850MHz)
• Telstra 4G (700/ 1800/ 2600MHz)
• 2T2R MIMO on 700 & 2600MHz
• 75 MHz of channel bandwidth supporting up to four bands simultaneously
• Coverage Units (up to four) are powered from the NU using PoE
• 2x QMA optional service antenna ports (MIMO or SISO)

• Product Type Telstra Coverage Unit
• System Features:
- Enterprise-class, carrier-grade, hybrid active DAS
- MIMO RF inputs for (a) small cell donor or (b) external off-air donor antenna
- Network Unit (NU) (Head End) attaches to Coverage Unit (CU) (Remote Unit) via Cat 5e cable
- A single NU and up to four (4) CUs may be attached (hub and spoke architecture) in a Cel-Fi QUATRA system
- Multiple Cel-Fi QUATRA systems may be deployed to scale with building size
- Up to 100m (Cat5e) or 150m (23AWG CAT6/7) CU cable length
- Cel-Fi QUATRA Range Extender (QRE) (optional) may be used to increase NU-to-CU distance to 300m (984 ft)
- Remote Management through Nextivity’s Cel-Fi WAVE cloud platform
- Easiest installation in its class
- Glanceable LED User Interface (UI)
- Mounting hardware included
• Wireless Features:
- Supports up to four (4) bands simultaneously from a single operator
- 3G/4G/5G support (WCDMA / HSPA+ / LTE)
- Supports FDD
- MIMO (in two bands, see table below for specifics per model)
- Up to 100 dB system gain per band (in Off-Air mode)
- Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and cellular devices
- Advanced digital echo-cancellation (>30 dB) and channel select filtering algorithms
- Active management of the cellular link between the Base Station and user devices
- Automatic Gain Control (AGC) based on fast real-time echo-cancellation
- Linear RF front end
- Adaptive signal equalization
- Uses Nextivity’s 3rd-generation “ARES” chipset
• Power (Network Unit only:
- 54 VDC @ 2.22 Amp via external supply (51.3 to 56.7 VDC tolerance)
- External supply: 100 to 240 VAC, 47–63 Hz
- Power consumption less than 120W max
- Network Unit provides power to Coverage Units over Cat 5e (PoE)

• 1x Cel-Fi Quatra Telstra Coverage Unit with 3/5/7/28 Bands RPR-CF-00153
• User Guide